Costumes and Performances by Tab Kimpton

How to make a plugsuit part 6- Glowy chest orb

PlugsuitTutorial50

 

Okay, so as part of the plugsuit I needed a nice glowy orb to go on the chest. You could just do this with a red christmas bauble, but here’s the technique for casting in resin and adding a LED.

I bought a set of these off ebay-

$(KGrHqZ,!oIF!Fbll0O!BQJ1y9nVg!~~60_12

These are silicone baking moulds, perfect for casting gems or making tea cakes! I grabbed the 60mm wide ones.

 

PlugsuitTutorial1

 

My favourite clear resin is actually this stuff- the Gedeo Crystal resin. It’s a slow set of about a day but doesn’t have a smell and takes colour well.

PlugsuitTutorial2

 

I pour the resin in the mould then use a popsicle stick and some masking tape to float an orange 3mm led in the resin. Check that your LED works before wasting a cast!

PlugsuitTutorial12

 

After it’s cured I pull it out the mould, then attach some copper tape to each of the LED wires.

PlugsuitTutorial13

This is a stupidly simple circut- now all I have to do is slide a 1.5v cell battery onto the LED and it will glow. Sometimes the simple things are the best!

 

PlugsuitTutorial14

Ominous glowing!

 

 

 

 

Leave a Reply

Your email address will not be published.